Products
Jaw crusher- Impact crusher
- Cone crusher
- Sand making machine
- Hammer crusher
- Vibrating screen
- Sand washing machine
- Screw washing machine
- Vibrating feeder
- Belt conveyor
- High pressure mill
- Xzm ultrafine mill
- Mtm trapezium mill
- Ball mill
- Mbm coal mill
- Stm vertical mill
- Floatation machine
- Magnetic separator
- Brick machine
- Shotcrete machine
Add: No.416 Jianye Road,South Jinqiao Area,Pudong New Area, Shanghai, China
Zip: 201201 E-mail: webmaster@zenithdream.com
Tel: 0086-21-50583966
Fax: 0086-21-50583955
Zip: 201201 E-mail: webmaster@zenithdream.com
Tel: 0086-21-50583966
Fax: 0086-21-50583955
Sand washing machine
Features :
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.
There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction.
There are no other wear parts except the screen mesh.
Features :
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.
There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction.
There are no other wear parts except the screen mesh.
Working Principle:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Sand washing machine specification:
| Model | XSD2610 | XSD2816 | XSD3016 |
| Spec. of Impeller(mm) | Φ2600×1000 | Φ2800×1600 | Φ3000×1600 |
| Impeller Speed(r/min) | 1.178 | 1.177 | 1.179 |
| Capacity(t/h) | 20-50 | 30-60 | 50-120 |
| Input Size(mm) | ≤10 | ≤10 | ≤10 |
| Weight(t) | 4.6 | 7.5 | 9.6 |
| Motor Power(kw) | 5.5 | 11 | 15 |
| Decelerator Model | ZQ50-50-T-Z | ZQ65-50-T-Z | ZQ65-50-T-Z |
| Overall Dimension（mm） (L×W×H) | 3255x1982x2690 | 3540x3000x2880 | 3845x3000x3080 |